Finishing work of a dwelling is always very important in construction, thanks to a high-quality finish, an ordinary building turns into a cozy nest. The building will look impressive if a granite staircase is installed in it, but, of course, there are other design solutions.

What kind of cladding should you choose, so that the warmth fills your hearth, and the appearance delights those around you with its originality? Here are some features of the facade decoration that you should pay attention to.

Brief content of the article:


It is unlikely that anyone will find a way much more famous than plastering. He gained fame for his practicality and originality. The plaster applied to the surface of the facade will help keep the heat in the interior of your home. Also, plastering protects the walls of the building from precipitation. In addition, plaster increases the fire resistance of your home.


Painting facades is a fairly practical way, with this method you protect your home from decay and destruction. The reliability of staining depends on the correct choice of a suitable paint for this. Life experience confirms that the best of all options is the acrylic base of water-dispersion dyes.

When choosing a dye, consider what kind of surface you need it for. If the facade is made of concrete, then a paint that does not allow air to penetrate is suitable for you, this way you will maintain the quality of the painting. A wooden building needs paint that can resist the effects of moisture. By the way, do not use combustible paint. Metal, of course, is best painted with moisture-resistant materials, so you protect iron from corrosion.


Ceramic material can also be used to finish the facade. A very popular way is to do this with ceramic tiles, tiles, bricks or clinker products. Clay, which is part of the ceramic tiles, with its peculiarity protects the facades from deformation and destruction. Facades finished with clinker are much stronger, even when you use brick or other materials, more resistant to moisture.


To do this, you need a lining, or more precisely, a block house is its kind, with which the facade of your nest will be securely sheathed. In addition, this is a finishing board with which you can be sure of the stored heat, a wonderful climate in your home — there are no restrictions on air.

A natural stone

Also use natural stone. The specific qualities of marble, granite or onyx are perfect for you. The use of natural stone when finishing facades increases the level of thermal conductivity, prolongs the «life» of finishing work due to the strength of natural stone.

Fake diamond

Artificial stone will help you finish the facade wonderfully. This is a kind of mixture of sand and fillers with cement. When using artificial stone, you can easily cut it by applying rounded corners in the finishing process. Finishing the facade is much easier with the help of artificial stone than using natural material.


Very modern — to clad the facade using siding. The environmental friendliness of this material protects and at the same time ennobles your home, adding aesthetics. Using siding, you will be able to complete the cladding of not only housing, but also utility and industrial premises.

This material will provide excellent heat and sound insulation, and will become a very serious obstacle to any adverse weather conditions. No less important is the fact that the «life» of siding is quite long, and this material is suitable for any surface — wood, brick, concrete and even tiles.

Important points when facing

Regardless of the material chosen, you must follow certain rules, otherwise you will never properly veneer your facade. Here they are:

  • when the surface is plaster, treat it with a primer. If the surface is wooden, do not forget about applying waterproofing. For brick and concrete surfaces, it is not necessary to resort to additional processing;
  • it is much more convenient to start finishing when the temperature is 5-25 degrees above zero. If you need to work at low temperatures, use frost-resistant glue;
  • plastic film will help in creating a greenhouse effect. When the temperature level exceeds 25 degrees, do not let the sun’s rays even get close to the surface you are working on.

And most importantly, use your creativity. There are no limits for perfection!